Impact & Shock stamping machine
On line inspection of high speed impact continuous stamping terminal of stamping machine
With the rapid development of heavy industry and the continuous improvement of technical level, a variety of new materials and new processes are constantly introduced in aerospace and other engineering technologies. How to accelerate the development of lightweight, vibration and noise reduction products to adapt to and meet the vibration, impact, pressure and other parameters of the measurement occupies an important position. All kinds of sensors, signal adjusters, analysis, recording and processing instruments are developed to meet this requirement, among which the sensor is the first step to obtain accurate and real data.We introduce a new product v519a for high impact testing. V519a is IEPE single axis acceleration shock sensor, which can measure shock and vibration at the same time. Circular shear ceramic is used
Over time, the crystal shows excellent output stability. Transmission of low impedance two-wire IEPE signal, through the same cable voltage output constant current power. The signal ground is connected to the device housing. The isolation mounting plate is optional. Polarity reversal protection, sealed housing. Integrated lightweight cable provides reliability measurement and long-term stability, in addition to adhesive mounting, the 519a also has Ø 3.05 * 2 through hole for screw installation in test.
This is the ideal product for impact testing, especially lightweight structure and instant impact.
Product features
Lateral sensitivity guarantee
During the impact test, the lateral acceleration has a great impact on the measurement results. Our products can effectively prevent the impact of other directions on the sensor measurement, so as to achieve < 5%;
Light weight
During the impact test, the mass of the sensor body will have a great impact on the test results. The greater the inertia, the greater the impact of measurement; The weight of 519a is as light as possible, reaching 2.5G;
anti-interference
When impact testing, the environmental impact is often complex, including magnetic environment, temperature environment, humidity environment and so on. At this time, the sensor body needs the corresponding circuit conditioning function, so as to minimize the interference to the complex environment.
V519A Single axial shock application accelerometer
V519A Single axial shock application accelerometer:
V519A is an IEPE single axial accelerometer permitting simultaneous shock and vibration measurements. 519A features an annular shear ceramic crystal which exhibits excellent output stability over time. The accelerometer incorporates an internal circuit in a two-wire IEPE system which transmits its low impedance voltage output through the same cable that supplies the constant current power. Signal ground is connected to the
outer case of the unit. Isolated mounting plate are available by option. Polarity inversion protection for the amplify circuit is inherent in the circuit design. The welded stainless-steel construction provides a lightweight hermetic housing. Integrated lightweight cable provides reliability measurement and long-term stability over the operation. In addition to adhesive mounting, the V519A has Ø3.05*2 through holes for screw mounting on the test object. The 519A provides wide frequency response, which is ideal for shock testing especially for lightweight
structures and instant impact.
Feature / Application
•Miniature Size •Shock testing
•Screw mounting •Explode research
•Hermetic seal •Armor analysis
•Annular shear mode •Aircraft testing
•Wide temperature range
•Wide frequency response
