Transport Impact Indicator, Anti-Collision Label ShockShower2 for 3 g, 5 g, 10 g, 15 g, 20 g and 25
Transport Impact Indicator, Anti-Collision Label ShockShower2 for 3 g, 5 g, 10 g, 15 g, 20 g and 25 g, 50 g, 100 g
ShockShower2 Impact Indicator is a kind of special design is very exquisite vibration shock response small device, it is different from general machinery or magnetic reaction mechanism, but by inlaid on the label of a special pigment was filling liquid glass tube to record and display the color change of the abnormal vibration of things happen, when the vibration labels of the goods by the abnormal vibration, the glass is broken, Its color changes from white to red, quickly and permanently recording the unusual tremor. By designing labels with different sensitivities, different vibration conditions can be sensed and indicated.
2 Shockshow sticker, shock indicator can specify G value freely, such as 3G, 5G, 10G, 15G, 20G, 25G, 50G, 100G, etc
Shock SHOW damage vibration warning label, it is attached to the outer surface of the package, through the color change of a filled with a special liquid glass tube embedded on the label, to record and display the occurrence of abnormal vibration things, when the goods with a vibration label in the process of handling by abnormal vibration, over a certain limit when the G value, The color of the glass tube changes from white to red, quickly and forever recording the unusual tremor. By designing labels with different sensitivities, different vibration conditions can be sensed and indicated.
Keywords: vibration monitoring, vibration sensitivity, falling, logistics packaging transportation
| The critical G value for reference | 5G | 25G | 37G | 50G | 75G | 100G |
| * color | blue | yellow | purple | red | orange | green |
The choice of indication label depends on the volume (length * width * height) of the item and the weight of the item; The larger the volume, the heavier the weight of the cargo, the more sensitive the type to choose. Other factors that should be taken into account
· Packaging materials; The packaging design is quite stable, and the damage rate is low, you can choose the type of low sensitivity;
· Fineness of the goods themselves; If the goods are quite delicate and the requirements for transportation are very high, the type with high sensitivity should be selected.
· Product protection point and weight center; When the product design is more special, such as top-heavy type, the requirements of transportation are relatively high, accordingly, the type of high sensitivity should be selected
Cargo Volume (m3)
| Weight (kg) | 0.001-0.030 | 0.031-0.135 | 0.136-0.400 | 0.401-1.350 | 1.351 + |
| 0-4.5 | green | green | orange | orange | red |
| 4.6-11.25 | green | orange | orange | red | red |
| 11.7-22.5 | orange | orange | red | red | purple |
| 23-45 | orange | red | red | purple | purple |
| 45.5-112.50 | red | red | purple | purple | Yellow |
| 113-450. | red | red | purple | Yellow | Yellow |
| 451 + | -------- | purple | Yellow | Yellow | Yellow |
Note: 1. The product packaging and the texture of packaging materials are likely to be related to the drop height and label discoloration;
2. This table is for reference only, it is recommended that users must do the actual drop test according to their product packaging and other conditions to find
To the sensitivity label that best suits the protection of your product.
Standard for drop detection of anti-vibration labels (mm)
| G value | 25G | 37G | 50G | 75G | 100G |
| Less than 50 kg | ---- | 300-450. | 300-600. | 600-900. | 900-1200. |
| More than 50 kg | 150-300. | 200-400. | 300-450. | ---- | ---- |
Technical specification requirements for shock proof labels
| parameter | Specification values |
| The use of temperature | -13°F/ (-25°C) to +176°F/ (+80°C) |
| The sensitivity | Available from 5G. 25g, 37G, 50G, 75G and 100G impact sensing at 360° direction |
| Ensure that the scope of | +/-15% of the regular value |
| The responsivity | Reacts to a single shock and is irreversible |
| During the reaction | In the range of 1 to 50 ms |
| The life cycle | Two years after sale |
Stick put rules
1.1 Stick put principle
Usually, the shockproof label is placed on the left or right side of the package. The heavier the package, the lower the position of the label.1.2 Green (100G) type label placement
greenShock-proof labelsGenerally affixed to the left or right corner of the package near the edge, as shown in the figure below.
Fig. 1 Schematic diagram of green (100G) type label placement
1.3 Orange (75G) type label placement
The orange anti-shock label is generally affixed to the upper left or right corner of the package near the edge, as shown in the figure below.
Fig. 2 Schematic diagram of orange (75G) type label placement
1.4 Red (50G) type label placement
redShock-proof labelsShall be differentiated according to the weight of the package, for less than50Kg, affixed to the left or right upper corner of the package near the edge, for greater than50KgPasted on the left or right side off the ground300mm-600mm, as shown in the figure below.
Fig. 3 Schematic diagram of red (50G) type label placement
1.5 Purple (37G) type label placement
Purple anti-shock labels shall be pasted and placed according to the following conditions:Packing weight between 20Kg and 50Kg, affixed to the left or right edge of the packing;
If the weight of the package is more than 50Kg, it shall be pasted on the left or right side 300mm-600mm above the ground.
For large packing cases or pallet shipping boxes, use 2 labels placed diagonally on both sides;
As shown in the figure below.
Fig. 4 Schematic diagram of placement of purple (37G) label
1.6 Yellow (25G) type label placement
Yellow anti-vibration labels generally need to be placed diagonally on both sides of the two labels, attached to the left or right 300mm-600mm above the ground, as shown in the figure below.
Fig. 5 Schematic diagram of yellow (25G) type label placement
1.7 Blue (15G/20G)Type label placement
The blue anti-vibration label is the same as the yellow label. Generally, two labels are required to be placed diagonally on both sides and affixed to the left or right 300mm-600mm above the ground, as shown in the figure below.Fig. 6 Schematic diagram of blue (15G/20G) type label placement
1 The appendixSHOCK SHOWShock-proof labelsThe criticalGValue calculation equation
| model | color | Refer to the G score | The impact Angle | Computational equation |
| E | green | 100 | 45 ° | G = 367.2 / t + 102.5 |
| D | orange | 75 | 45 ° | G = 299.8 / t + 81.5 |
| A | red | 50 | 45 ° | G = 233.1 / t +52.7 |
| B | purple | 37 | 45 ° | G = 215.0 / t + 40 |
| C | yellow | 25 | 45 ° | G = 201.1 / t +25.1 |
Note: ordinary movement or bumping will not affect the label.
3. Application Industry:
Auto parts, medical apparatus and instruments, bank ATM machine, cabinets, network equipment, aviation equipment, wind power equipment, copiers, printers, instruments and meters, standard equipment, exhibition items, audio, video equipment, mechanical equipment, art, crafts, heavy furniture, solar power systems, refined products, packaging items in groups.
4. Six advantages:
· - Reduce rough handling or illegal handling in the process of transportation and storage.
· - Provide irrefutable evidence of illegal handling.
· - Can play a striking warning role to deter illegal handling operations.
· - Remind the consignee to check the goods for damage before receiving them.
· - Facilitate an auditable system of accountability throughout the shipment process.
· - Help identify problems along the supply chain from production, shipping to inventory.
