V511A Single axial vibration sensor,AC-Response Dynamic accelerometer
V511A Single axial vibration sensor,AC-Response Dynamic accelerometer:
Model V511A is an IEPE single axial accelerometer permitting simultaneous shock and vibration measurements. V511A features an annular shear ceramic crystal which exhibits excellent output stability over time. The accelerometer incorporates an internal circuit with TEDS(optional) in a two-wire IEPE system which transmits its low impedance voltage output through the same cable that supplies the constant current power. Signal ground is connected to the outer case of the unit. Isolated mounting studs or housing are available. Polarity inversion protection for the amplify circuit is inherent in the circuit design. The welded stainless-steel construction provides a lightweight hermetic housing. The miniature 10-32 glass insulated connector provides long-term stability over the operating temperature range. In addition to adhesive mounting, the V511A has 10-32 threaded holes for stud mounting on the test object. The 511A provides wide frequency response, which is ideal for dynamic vibration and shock measurement especially for lightweight structures and drop testing for the packaging industry.
Model V511A is an IEPE single axial accelerometer permitting simultaneous shock and vibration measurements. V511A features an annular shear ceramic crystal which exhibits excellent output stability over time. The accelerometer incorporates an internal circuit with TEDS(optional) in a two-wire IEPE system which transmits its low impedance voltage output through the same cable that supplies the constant current power. Signal ground is connected to the outer case of the unit. Isolated mounting studs or housing are available. Polarity inversion protection for the amplify circuit is inherent in the circuit design. The welded stainless-steel construction provides a lightweight hermetic housing. The miniature 10-32 glass insulated connector provides long-term stability over the operating temperature range. In addition to adhesive mounting, the V511A has 10-32 threaded holes for stud mounting on the test object. The 511A provides wide frequency response, which is ideal for dynamic vibration and shock measurement especially for lightweight structures and drop testing for the packaging industry.
Feature / Application
• Miniature Size
• Adhesive or stud mounting
• Hermetic seal
• Annular shear mode
• Wide frequency response
Product specification
| Range(g) | 50 |
| Velocity Range(in/s) | 0 |
| Sensitivity( ±10%) | 100 |
| Frequency Range(Hz) | 0.5 - 15000 |
| Weight(g) | 8 |
| Shock Limit | 5000 |
| Operation Temp(°C) | -50 to 125 |
| Output Type | IEPE |
| Axial | Single axial |
| Mounting | Adhesive/Stud |
| Temp.Signal | N/A |
| Sensor Type | IEPE |
| Sens. Unit | mV/g |
| Excitation | Constant current: 2~10mA |
| Mating cable | 11 |
Product specification：
